Multimeter

Product Description

SUNSHINE DT-20N Multimeter Fully Automatic High Precision Color Touch Screen AC DC Voltage and Current Resistance Measurement

Note that the battery is not included

. full touch screen control opens the intelligent era of multimeter . Mini body, take it with you anytime and anywhere . easy to learn and understand . equipped with tip probe, it can test precision components

   The digital multi meter, DMM, is one of the most common items of test equipment used in the electronics industry today. While there are many other items of test equipment that are available, the multi meter is able to provide excellent readings of the basic measurements of amps, volts and ohms. In addition to this the fact that these digital multi meters use digital and logic technology, means that the use of integrated circuits rather than analogue techniques, enables many new test features to be embedded in the design.

·         DC voltage: 200m/2/20/200 V ± 0,5%, 600 V ± 0,8%

·         AC voltage: 200/600 V ± 1,2%

·         DC current: 200µ/2m/20m A ± 1,0%, 200 mA ± 1,5%, 10 A ± 3,0%

·         Resistance: 200/2k/20k/200 kΩ ± 0,8%, 2MΩ ± 1,0%

·         Power: 9V (6F22) battery and Dimensions: 138x69x31 mm, Weight: 160 g Apprx

1.       Smart touch. Full touch screen control

2.       High definition 3.2-inch large screen, easy to read the measure values

3.       The design is small and light, more convenient to carry.

4.       Easy operation, easy to learn and use.

5.       Configure special tip test pen, can test precision components

6.       With flashlight function

7.       Intelligent integration Burn-proof design

8.       3 high-speed chips in this machine make the measurement more accurate

Specifications:

SUNSHINE DT-9205E digital multimeter is easy for operating, accurate readings, full-featured, compact, easy to carry. Pocket-type battery power to do large-screen LCD digital multimeter for engineering design, laboratory, pilot production, factory affairs, field operations and industrial maintenance applications.

The multimeter has the following main features:
1. CMOS integrated circuit. Double integral principle of A / D conversion, automatic zero, auto polarity selection, over range indication.

2. When the line through a short beep sound tests are shown dike

3. The new SUNSHINE DT-9205E digital multimeter, the appearance of new, more in line with international safety standards. Adds automatic shutdown, beep sound Japanese configuration in line with international standard test leads.

This multimeter has the following characteristics:

1, CMOS integrated circuits, principles of double integral A / D conversion, automatic zero, auto polarity selection, over range indication.
2. LCD screen with high contrast 70 × 40-mm screen, word up to 25 mm. Required by the viewing position, the display screen can be visual angle of about 70 °, in order to obtain the best effect was observed.
3, with automatic shutdown, about 25 minutes after the power is automatically cut off power to prevent the meter off after use forgotten power. Repeat power switch operation, we can continue to boot.
4, the new optimized design of highly reliable range / function rotary switch structure. Use 32 stalls, more effectively avoid misuse, attention to maintenance.

Product size:185*90*45mm

Package size:132*205*65mm

Net weight:315g

Gross weight:545g

True RMS measurement which is accurate and stable.

Simulated bar and numbers display simultaneously which is convenient and direct.

Intelligent anti-burning protection which is safe and reliable

Induction electroporbe faction. It would beep when there is current.

Temperature test (0 ° C ~ 1000 ° C), can test the liquid and solid temperature

When shift blocks, there would be remind sound "bee". Providing humanized operation

High-class body, streamlined designed. Comfortable touching.

Measuring Current: AC6A/DC10A
Measuring Voltage : AC600V/DC1000V
Dimensions: 84x90x46mm
test temperature: 20-1000 degree
Feature:  automatic identification
Sampling rate: 3 times per second
Test way: double integral A/D conversion

• Unity MAS830L Digital Multimeter
•  
• Max Display: 3-½ digits, 1999 count, 06” high
• Polarity: Automatic, indicated minus, assumed plus
• Measure method: double integral A/D switch implement
• Sampling speed: 2 times per second
• Overload indication: :1” is displayed
•  Operating environment: 0 to 40 at <80% RH
• Storage environment: -10 to 50 at <85% RH
• Battery type: 9V battery IEC 6F22, NEDA 1604
• Static electricity: about 4mA
• Product size: 135mm x 67mm x 33mm
• Weight: 145g (including battery)

• SC voltage
• AC voltage
• DC current
• Transistor test
• OHM
• Diode test

Mechanic SIV110 palm size electrical tester, Mechanic SIV110/SIV120 voice broadcast multimeter for mobile phone repair, high precision electrician measurement multitester with LCD display screen, Mechanic pocket digital multimeter auto digital display multimeter for cell phone repair, universal AC DC voltage diode resistance tester and electrician test tools

Mechanic SIV110 Universal Digital Multimeter Pocket AC DC Voltage Diode Resistance Tester

Product Parameter :

·         Product Type: Smart Pocket Digital Multimeter

·         Safety level: IEC1010 CATIV600V

·         Measurement function: DC voltage, AC voltage, DC current, AC current, resistance, capacitance, diode (4.2V high voltage output)

·         Automatic level: triode, continuity test, intelligent automatic voice report, manual true rms value, roughly

·         DC voltage rating: 0.6-800V ± 0.5%

·         AC voltage rating: 0.6-600V ± 0.8%

·         DC current rating: 20mA-10A ± 2.0%

·         AC current rating: 20mA-10A ± 2.0%

·         Resistance level: 0.1Ω-60MΩ ± 0.8%

·         Capacitance level: 10nF-60nF ± 3.5%

·         Maximum display: 5999

·         Size: 145 * 70 * 35mm

·         Display: Blue backlight LCD, 1999 counts, updates 2-3/sec.

·         Display Count: 2000

·         Maximum display value: 1999

·         Measuring Method: Dual-slope integration A/D converter.

·         Power: 9V battery,

·         NEDA: 1604 or 6F22 type.

·         Fuse Protection: 200mA/250V

·         Operating temperature: 0~40°C (32~104°F)

·         Storage temperature: -10~50°C (14~122°F)

·         Relative humidity: <80 percent RH

·         Altitude: <2000m

·         Diode: 2.7V

·         Continuity Buzzer: <70+-30

·         Safety Class: I CAT II: 600V.

·         Over-range indication: 1.

·         Polarity display for negative polarity.

·         Low voltage indication on the display.

·         Data hold.

·         Display Backlight.

·         Fuse: F1: F250mA or 250V,F2: F 10A or 250V.

·         Low Battery Display.

·         Waterproof: IP20

The meter is a handheld 31/2 digital multimeter for measuring DC and AC voltage, DC current, Resistance, Diode, Transistor, and Continuity Test with battery operated. The Backlight of the display is optional. Display 3 1/2 digit, 7 segments, 15mm high LCD. Backlight (option) When this button is pushed, the Backlight of the display is on. After about 5 seconds, the Backlight is self-off. the backlight is on again, just push this button once. Rotary switch This switch is used to select functions and desired ranges as well as to turn on/off the meter. Hold button When this button is pushed, the display will keep the last reading, and the “ ” symbol will appear on the LCD until pushing it again.“10A” jack Plug-in connector for red test lead for 10A measurement. “COM” jack Plug-in connector for black (negative) test lead. “V mA” jack Plug-in connector for red (positive) test lead for voltage, resistance, and current (except 10A) measurements.

• The YX-3600TR analog multimeter  can be ideal for various fields of activity such as radioelectronics or electronics with a much higher accuracy than digital multimeters due to the measurement method – magnetoelectric with rectifier.
• The analog multimeter YX-360TR  has an analog display with needle and graduated scale with the possibility of adjusting the indicator and a button for ohm adjustment.The analog multimeter YX-3600TR  benefits from overload protection and has 7 different measurement methods, current, voltage, transistor tester, continuity, etc.
• The YX-3600TR analog multimeter  has the following measurement ranges:

Measuring range:

• DC voltage: 0.1 V … 1 000 V
• AC voltage: 0.1 V … 1000 V
• current: 2.5 A 0.1 uA …
• resistance: 1 ohm .. .20 MOhm
• battery tester: 1.5 V and 9 V
• transistor amplification factor (hFE)

Specifications:

• analog display with needle and graduated scale
• allows the adjustment of the indicator
• working temperature: 0 ° C … + 40 ° C
• ohm adjustment button
• overload protection – measures direct
• and alternating voltage up to 1000V
• measures direct current up to 1000V 250mA.
• measures resistance up to 10M ohms.
• graduated scale with mirror to improve the reading of the measured values.
• high level of protection when exceeding the range with fuses and protection diodes.
• tester for hFE transistor (direct current gain) between 0-1000 (with additional tester for transistor)
• analog display with needle and graduated scale.
• measurement method: magnetoelectric with rectifier.
• supply voltage: two batteries of type R6 AA 1.5V or a battery of type 6F22
• dimensions: 100 X 145 X 35 (mm).
• device weight: 280g (with battery included).
• accessories: instructions for use, measurement testers.
• Power supply: 2 R6 (AA) batteries, 1.5 V
• Dimensions: 150 x 100 x 35 mm