SMD Rework Station

• Best Product, Easy to Use and Durable. Heat Air Gun Rework Station, MAXX PAMMA 850A Heat Air Gun.
• Power: 220V , 270W, Temperature: 200 Celsius System-450 Celsius System.
• Heating Element Porcelain Heating Element.
• Heat Air Gun Rework Station, MAXX PAMMA 850A Heat Air Gun.
• Rework Station Works Immediately when the Handle is Picked Up and Enters Estand by Mode when the Handle is Placed in the Holder, Temperatures and Air of Rework Station Continuously Adjusted by Buttons the Needs in Different Workplaces, The Maxx Pamma 850A is Facilitated with an Automatic Cooling Function. Desoldering Maintenance System Combined by Rework Station.
• The automatic function to prevent other PCB part damage while soldering.
• Heat time of 20 seconds is as per the professional need.
• Conical shape tip made up of Nickle gives efficiency to the work.
• Maxx Pamma SMD with a battery booster
• Maxx pamma DC Power Supply
• The best part is, they are manufacturing in India.
• so all the mobile repairing tools which you buy from Maxx pamma are made in India.
• If you are in a mobile repairing field then you must hear about Maxx pamma, today I am sharing 850a
• A low budget SMD machine launched by Maxx pamma.
• The Maxx Pamma 850A is facilitated with an automatic cooling function.
• It uses the intelligent AI technology, rework station works immediately when the handle is picked up and enters standby mode when the handle is placed in the holder.
• The whole machine controlled by microwave chip to make sure of temperature accuracy and stability of SMD.
• Temperatures and Air of rework station continuously adjusted by buttons the needs in different workplaces.

• Easy to use.
• the air flow linear regulator, mains air flow can be kept stable when there is a change, the double vortex rotating wind, the wind gentle, there is no impact.
• heating express, three seconds to reach the set temperature, the temperature of the liquid crystal display, intelligent sensors, automatic cooling, delay shutdown.
• blow welding with plastic components, ringer, insert the end of the inline blocks and other non-deformation, blow welding circuit board not sparkling.
• Demolition of the shield does not change color
• blowing BGA chip easily broken.
  Closed loop sensor: Temperature can be controlled by zero voltage triggering mode.
• Large power and rapid heating: Temperature can be conveniently adjusted and the temperature is accurate and stable, and not affected by airflow.
• Step less airflow adjusting with wide range: Temperature can be conveniently adjusted.
• Sensitive electromagnetic inductor in handle: Ensures the unit beginning working immediately so long as the handle is held. when handle is put on the holder, The system will return back to standby mode.
• Automatic cooling system: Can increase the life of heating element and protect the unit.
• Compact unit takes up little space on the workbench.
• QUICK 857DW+ Lead Free Adjustable Hot Air Heat Gun With Helical Wind 580W
• linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
• express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling,
• delay shutdown.
•  welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color
  BGA chip is not easy to break. 

Product use:
suitable for a variety of components disordering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc.
used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc.

Quick 706W+ 580W LED Digital Display 2 In 1 Hot Air SMD Rework Station Soldering Station Iron Heat Gun Kit for Phone Welding Repair

• LED accurate digital display, single control. effectively avoid the damage of components due to temperature error
• Small Size. Save working space.
• Hot Air Rework Station and Soldering Station 2 in 1.
• Ceramic skeleton heating core,increase stability and not easy to burn short circuit.
• Straight wind, high speed,low noise and strong wind
• The handle is equipped with sensor device, which is placed on the handle frame. The system will automatically cool down and enter the standby state

Original QUICK 706W+ 2 in 1 hot air gun soldering iron rework station, QUICK 706W+ digital display SMD rework welding station. QUICK 706W+ ESD Safe lead free phone rework station for BGA soldering repair.

QUICK 706W+ Hot Air Soldering Rework Station (2 in 1)

Specifications:

Hot Air Station Power Consumption: 580W
Soldering Iron Power Consumption: 50W 24V/AC
Voltage: 220V/110V
Soldering Iron Output Temperature: 100°c - 480°c
Display: LED Digital Display
Air Out Way: Straight wind
2 in 1 rework station, BGA hot air rework station+ soldering iron
Stepless  airflow adjusting with a wide range. Temperature can be conveniently adjusted.  
LED accurate digital display, single control.
Small Size. Save working space.
Ceramic skeleton heating core, increase stability and not easy to burn short circuits.
Straight wind, high speed, low noise and strong wind
The handle is equipped with a sensor device, which is placed on the handle frame.
The system will automatically cool down and enter the standby state.

• Attention:

• Be careful when operate with high temperature. Do not use it near to the flammable and explosive gas and objects. The air outlet is really hot that can burn body.
• When the hot air gun is working, please do not leave your position.
• Do not touch the hot air gun by children.
• After using be sure to cool down the machine and put it in safety place. When it’s turn off, the heating tube will gush out cool air temporarily. During cooling time please do not take out the power plug.
• After cool, take out the power plug.

Description

Our company has gained immense accolades in the field of offering SMD Rework Station to the clients. SMD Rework Station is widely cherished among our valuable customers owing to its remarkable attributes. Offered range is manufactured with high precision using excellent quality raw material and innovative technology in tune with set industry standards at our vendor’s end.

FEATURE

1. Closed loop sensor, temperature can be controlled by zero voltage triggering mode. Large power and rapid heating. Temperature can be conveniently adjusted and the temperature is accurate and stable, and not affected by airflow.

2. Step-less airflow adjusting with a wide range. Temperature can be conveniently adjusted.

3. Sensitive electromagnetic induct or in handle ensures the unit beginning working immediately so long as the handle is held. When handle is put on the holder, the system will return back to standby mode. Easy to use.

4. Automatic cooling system can increase the life of heating element and protect the unit.

5. Compact unit takes up little space on the workbench.

CHARACTERISTIC

1. Comfortable portable handheld and the Digital LED display.

2. Microcomputer control, warming-up quickly.

3. Adjust the air flow and temperature control rotation.

4. Refer to the instructions included with three kinds of nozzles (big,medium and small) replacement part.

5. Would replace the part if the resistance value is incorrect.6. Intelligent detection and cool airflow features.

PARAMETERS

AKT 857D+ blower hot air rework station

The AKT857D+ blower hot air rework station features the latest dual turbo blower with a large airflow rate and a longer service life. The air supply is turbo charged, and generates a spiral wind if using a large nozzle, and a strong wind if using a small nozzle. The airflow rate is also adjustable.

Features 1. The blower hot air rework station features a highly precise thermocouple temperature control system, ensuring a stable performance with a high power, fast heating speed, and excellent temperature accuracy. No functions will be affected by the airflow rate. 2. This rework station utilizes a high quality air gun heater with a stable, reliable performance and a long service life.

Product Details:

• Power Consumption:580W
• Air pump: DC motor, double turbine rotate out of the wind
• Temperature control:100 to 450 degrees
• Gas flow rate:100 liters/minute

Product Features: 

• Linear air volume adjustment, mains have to change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact.
• Express of temperature, 3 seconds to reach the set temperature, the temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown.
• Welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. The shield does not change color
• BGA chip is not easy to break. 

Product Use:

• Suitable for a variety of components disordering. Such as SOIC, CHIP, QFP, PLCC, BGA, etc.
• Used in thermal shrinkage, drying, in addition to the paint, in addition, to stick, thawing, preheating, disinfection, plastic welding, etc.

Packing Details:

1 Pcs of Mechanic 857DW+ SMD Rework Station

• * Preheating time of 4 seconds can heat time of up to 5 seconds, bid farewell to preheating, no need to wait
• * Two in the copper heating core and welding head:
• * Lead-free soldering iron tip, fast heat conduction, anti-oxidation, easy to solder
• * Standby automatically wakes up:
• * New handle design, you can grab the handle and wake it up at any time, getting rid of the disadvantages of the traditional 936 slow heating
• * LED digital temperature control display:
• * Adjustable temperature 200°C 450°C, anytime control, precise temperature control
• * Intelligent function control:
• * Intelligent automatic sleep, standby, and shutdown functions significantly increase the heating life, and the safe and energy-saving copper core effectively reduces potential safety hazards
• * Small and convenient:
• * A palm-sized portable business travel device that solves the transportation problems of traditional vehicles

DESCRIPTION:

·  With CH1, CH2, CH3 three working channels , and each channel can be set air volume , the temperature 
·  Password protection and key lock function .
·  Easy real-time operation , with magnetic switch control handle is placed in the handle shelves immediately into hibernation .
·   With automatic sleep function , in a dormant state parameters can be set .
· Sensor closed loop, microcomputer zero trigger temperature control, power, heating quickly , easily and precisely adjust the temperature stable , free from the influence of wind .
·   Brushless fans, air flow adjustable , large range , can be adapted to a variety of uses .
·   System with automatic cooling function of wind capacity , extend the life of the heating element and protect the hot air handle.

• Super Maxx SMD Autocut System
• Inverter Technology Super Maxx SMD
• Premium Quality SMD in Low Budget
• SuperMaxx Brun Free SMD used for Mobile Repair and Heating Parpess
• Auto-Cut SMD Rework Station
• Rework Station Works Immediately when the Handle is Picked Up and Enters Estand by Mode when the Handle is Placed in the Holder, Temperatures and Air of Rework Station Continuously Adjusted by Buttons the Needs in Different Workplaces, Super Maxx is Facilitated with an Automatic Cooling Function. Desoldering Maintenance System Combined. by Rework Station Desoldering Maintenance System Combined. by Rework Station.
• Power: 220V , 270W, Temperature: 200 Celsius System-450 Celsius System.
• Heating Element Porcelain Heating Element.
• Heat Air Gun Rework Station

MECHANIC HK-936D+ Intelligent Temperature Control Anti-static 220V 60W Soldering Station

• Temperature range: 200 480
• Temperature stability: ±2
• Output voltage: AC28V
• Power: 60W
• Volt: 220V
• Antistatic design, internal high quality copper products, refined solid shell
• High quality all copper transformer: a powerful transformer, power enough, stable quality
• Quick heating, constant temperature design, more stable temperature
• Open hole heat dissipation design: effectively increase the service life of heating element
• Double sided circuit board: Copper connected together, is not easy to damage, high stability, reduce the false welding weld.
• High quality silica gel sleeve: handle with high quality silica gel sleeve, light and comfortable, effective anti slip.
• Upgraded version of high power heating core: 60W high-power imported heating core, fast heating, temperature quasi, suitable for large solder joint disassembly

Package include:
1 x Soldering Station HK-936D+ ( 60W )
1 x Iron
1 x Iron Holder

• 1 Year Service Warranty.
• Separate Digital Display.
• Output Current:: 0-10A  Voltage: 0-30V.
• With Fine continuously Adjustable Button on front panel.
• Smart Phone, Android , IPhone and Base Phone Special.
• Use as a DC Power Supply, Short Killer, Battery booster (Lion to polymer).
• More function, Light Weight
• 100% Original , High Quality Parts.
• Free Doorstep delivery within 7 Working Days.

• It has four working channels: CH1, CH2, CH3, CH4, and the air volume and temperature of each channel can be set and stored.
• It has a variety of protection functions and perfect button functions.
• Convenient real-time operation, with magnetic switch control, the handle is placed in the hand. The handle frame immediately goes to sleep.
• With automatic sleep function, the parameters can be adjusted in the sleep state Set up.
• Sensor closed loop, microcomputer zero crossing trigger temperature control, high power, The temperature rises quickly, and the temperature adjustment is convenient and accurate and stable, and is not affected by the air output.
• Using brushless fan, the air flow is adjustable, the range is large, and it can be suitable.
• Should be used for multiple purposes.
• The system is equipped with automatic large air volume cooling function to extend the life of the heating element,
• Protect the hot air handle.
• Real-time /  temperature display function.
• Has the function of self-calibration of temperature.

• Closed-loop and MCU zero crossing design for achieving fast heating-up, accurate and stable control.
• Intelligence cooling system and deferred power-off function to extend hot air gun lifespan. Embedded sensor inside iron hand piece to obtain auto-sleep to save energy.
• Compact unit to save workbench space and eye-pleasing appearance.
• Intelligent malfunction detection and indications

products details:

·         power: 75w

·         voltage range: ac110-230v

·         output voltage: 12v

·         temperature control range: 120-450c temperature

·          

packing details:

1 x t245 soldering station with handle

1 x oss c210 soldering tip

1 x bit cleaner

1 x magnetic pad

1 x user manual

1 x sponge

1 x copper wire ball

1 x handle sleep stand

1 x silicone pad

1 x ground wire

1 x power cable

• 8 seconds quickly heating-up and down
• Efficient insertion type heater design
• Handle is light design, feel comfortable even in long hour usage
• Push-button thermostat
• Handle made of silicone materials, resistant to high temperatures

Short-circuit fault detection for various mobile phones and computers.
Bring you a convenient short-circuit fault detection and repair experience

Features:

• This is a new product for mobile phone motherboard repair tool

• Help the technician to judge the current interruption of the main board accurately and quickly.

• Sound prompt

• Overheating protection

• Safe and efficient
• Positive and negative polarity recognition
• Voltage: 100V-250V